MCP 1-4_Karussell_256x253

NEW Multichannel Platform BioProTT™ FlowMCP for simultaneous flow measurement in single- use bioprocess applications.

Supporting up to eight non-invasive flow sensors at the same time.

   

Read more
MCP System_Karussell web_256x253

Seamless integration of the new BioProTT™ FlowMCP into existing setups through full compatibility with current BioProTT™ Clamp-On Transducers

 

Read more

Transit-Time ultrasound flow measurement product for non-invasive applications with em-tec Clamp-On Transducers. Product with display.

Read more

Ideal for use in bio-processes (bioreactors, fermenters) or in any other process which requires sterility in the line.

Read more

Highly integrated universal Flow-Measurement Board. Especially designed for use in mobile equipment.

Read more

Clamp-On Transducers for flow measurement in PVC and silicone tubings.

Read more

The em-tec SonoTT™ FlowLab designed for non-invasive flow measurement in blood vessels, enables you to carry out intra-operative quality control and documentation of surgical procedures in cardiovascular, vascular and transplant surgery.

Read more

Autoclaveable Vascular Transducers for a wide range of vessel sizes.

Read more
Logo DS und BPI und Interphex

Our high-quality products, components and systems for non-invasive flow measurement are especially suited to the requirements of the growing single-use segment.

Our multi-channel system BioProTT™ FlowMCP delivers simultaneous measurements of up to eight channels and impresses with its fast installation and space-saving installation position in the control cabinet. High measurement accuracy through custom calibration and compatibility with existing BioProTT™ Clamp-On sensors facilitates integration into existing systems and equipment.

Convince yourself of our expertise and experience and meet us on site:

19 - 21 February, 2019: DISPOSABLE SOLUTIONS / Amsterdam

2 - 5 April, 2019: BPI Europe / Vienna

2 - 4 April, 2019: INTERPHEX / New York, USA

Ground-breaking Ceremony for new Company Building: Ready for the Future!

The ground-breaking ceremony was held on Monday, November 19, 2018, when em-tec’s Managing Directors Dr. Hannspeter Schubert and Markus Traxler, mayor Siegfried Weissenbach and responsible architect Andreas Paluch has given the starting signal for the new headquarter in Finning.

If everything goes as expected, the new company building will be ready for occupation in spring 2020. The completion of the shell construction is - weather permitting – planned for June 2019. The subsequent interior work is scheduled for the beginning of March 2020. Upon completion, the new company building will have a potential for up to 150 employees.

Architect Andreas Paluch from Munich designed a modern two-storey building, which meets the highest technical standards, offers sufficient space for the increasing number of employees and will have attractive outdoor facilities. On a total of 4,950 square meters, new premises and offices are going to be built for the Production, Development and Administration departments.

MCP4-System_gelb-0312-x_rz_soft_web

NEW Multiple flow channels with one device: BioProTT™ FlowMCP

Our new BioProTT ™ FlowMCP multichannel platform is ideal for flow measurement on flexible tubing in single-use bioprocessing systems.

  • Space saving form factor for the control cabinet
  • Fast installation of up to eight channels
  • Best in class connectivity
  • Easy-to-use Clamp-on Transducer
  • High accuracy
  • Economical and cost-optimized system

MEASURE MORE THAN EVER

Learn more about...

Grafik_Messprinzip_DE

High Accuracy with em-tec BioProTT™ flow measurement system proven in customer environment

Since the late 1980s, there have been more than 20 indirect methods for measuring process flows for the bio-pharmaceutical industry. Few of these methods are well suited to single use systems. Non invasive transit-time ultrasonic flow measurement with Clamp-On technology can the achieve overall performance accuracy and repeatability required for typical process control applications. AlphaBio Inc. has evaluated three different single use system set-ups (TFF System, Isocratic Chromatography System and Gradient Chromatography System) with the em-tec BioProTT™ flow measurement system. Flow rates ranging from 2 to 16 LPM were measured and evaluated against an NIST calibrated Coriolis meter (Endress + Hauser.)  The results of this study indicate that that with proper material calibration and unit setup, flow rate measurement accuracies of less than +/- 2% of reading can be achieved.

em-tec’s BioProTT™ FlowTrack flow meters

New em-tec sales partner in USA

em-tec has partnered with Aquasyn LLC, a provider of highly innovative standard, as well as customized, fluid control solutions such as valves and associated components for the biotech and pharmaceutical markets. The ARTeSYN® brand of single use process fluid control valves and related components sets a new standard in single use flow control technology, making them a perfect partner for em-tec’s BioProTT™ FlowTrack flow meters.  Aquasyn will sell em-tec‘s BioProTT™ flow measurement systems in most of North and South America.  For more information, or a dealer near you, visit www.aquasyn.com.

Successful Development Cooperation with Sartorius Stedim Biotech

Sartorius Stedim Biotech, a leading international pharmaceutical and biotech equipment supplier, has entered into a global development cooperation agreement with em-tec. As part of this cooperation, the technology base of em-tec will be extended by jointly developed single-use components, such as FlowTube. Sartorius will exclusively market these as applications and distribute them worldwide as private label products under the brand name of BioPAT®Flow.

Press Release (PDF)

Process-oriented Quality Assurance

Our quality management system (certified to ISO 13485) provides for a correct, complete documentation of the project and ensures that all the strict guidelines that apply to medical device manufacturers are observed throughout the development process. Customers are thus well prepared for approval. We have experience in all classes of CE and FDA approvals.

Read more...